Call 021-556-1834
Features
-
Stainless steel
-
Liquid temperature:
-5°C ÷ +60°C for the models 70/05-70/07- 90/10
-5°C ÷ +90°C for the rest of the range -
Total head from 45,5 to 13,5 m
-
Flow rate 1.2 to 15 m3/h
-
Hydraulic efficiency index MEI > 0.4
Ebara CDX(L) Series
This single impeller centrifugal pump with hydroformed components ensures sturdiness, hydraulic efficiency and reliability.
​
CDX(L) model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
.png)
_Performance-01.png)
Performance Guide
Ebara 2CDX(L) Series
The components of the 2CDX(L) electric pump are obtained through the renowned hydroforming process. The twin impeller makes for a wider performance range than the single-impeller. The standard mechanical seal is made of Ceramic/Carbon/NBR, but special seals are available as well.​
Features
-
Flow rate from 1.2 to 12.6 m³/h
-
Total head from 71.5 to 27 m
-
Max. working pressure 8 bar
-
Max. temperature of the liquid -5°C ÷ +60°C for 2CDX(L) std and E versions
-
Max. temperature of the liquid -5°C ÷ +110°C for H, HS, HW, HSW versions
.jpeg)
_Performance-02.png)
Performance Guide
Ebara Right Series
This submersible pump is available in AISI 304 stainless steel. Perfect for seepage water and sewage draining. Pump body, impeller and shaft comes in AISI 304 (EN 1.4301) stainless steel. Mechanical seal is made up of Carbon/Ceramic/NBR (motor side) and SiC/SiC/NBR (pump side).
This pumps comes equipped with 5m cable type H07RN-F with or without float switch.
Features
-
Suitable for draining seepage water,
handling sewage sanitary fixtures, draining cesspits and discharging into the sewer. -
Available with float switch.
-
Capacity up to 18 m3/h
-
Total Head up to 9,5 m
-
Voltage in Single phase 1~230V ± 10%
-
Voltage in Three phase 3~400V ±10%
Performance Guide
Features
-
Flow rate up to 240 m³/h
-
Total head up to 100 m
-
Max. working pressure10 bar
-
Max. temperature of the liquid -5°C ÷ +90°C for standard models
-
Max. temperature of the liquid -5°C ÷ +110°C for H, HS, HW, HSW versions
-
Max. temperature of the liquid -20°C ÷ +120°C for E version
Ebara 3(L)(4) SERIES
This series is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.
(4).png)
Ebara 3D(4) SERIES
Standardised cast iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors.
The 3D SERIES is equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping.
Features
-
Flow rateUp to 138 m³/h
-
Total headUp to 70,0 m
-
Max. working pressure10 bar
-
Max. temperature of the liquid -5°C ÷ +90°C
-5°C ÷ +110°C for H, HS, HW, HSW versions
-5°C ÷ +120°C for E version -
MEI> 0.4
%20-%20MD_MMD(4).png)
Features
-
Flow rateUp to 1300 m³/h
-
Total headUp to 150 m
-
Max. working pressure16 bar
-
Max. temperature of the liquid-10°C ÷ 120°C
-
MEI> 0.6
-
Poles2 and 4
-
Protection degree IP55
Ebara GS SERIES
This series comes has a robust cast iron pump body.
The impellers is also available in cast iron, ductile cast iron and bronze. It has two replaceable bronze wear rings that ensure long-term reliable operation and high hydraulic efficiency.
The motors are available with 2 or 4 poles, 50 Hz, with IE3 efficiency (from 0.75 kW), ranging from 0.37 kW to 355 kW, which can be coupled with inverters.
Application
-
Industrial and Civil.
-
Water purification and treatment plants.
-
Chemical and petrochemical industries.
-
Handling of soiled liquids containing solid and/or filamentary substances.
-
Agriculture for irrigation and management of waste water.
-
Water extraction.