top of page

CP-ST
Centrifugal pumps

This stainless steel centrifugal pumps is suitable for use with clean water and with liquids that are not
chemically aggressive towards the materials from which the pump is made. All the components in contact with the pumped liquid are in stainless steel AISI 304 or AISI 316L thus guaranteeing complete hygiene and maximum resistance against corrosion.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

​

Models and performance guide​:

Features

CP-ST.jpeg

  • Flow rate up to 270 l/min (16,2 m³/h)

  • Head up to 45 m

  • Continuous service

  • Temperature of the liquid from -10 °C to +90 °C

  • Ambient Temperature to +40 °C

  • Manometric suction lift up to 7 m

  • Max. working pressure:

  •    – 6 bar for CP 100-130-132-150-158 ST4
                          CP 100-130-132-150-158 ST6

  •    – 8 bar for CP 170-170M ST4
                          CP 170-170M ST6
                          CP 180-190-200 ST4
                          CP 180-190-200 ST6

CP-ST_Model.png

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. As a result of their reliability and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

​

Models and performance guide​:

Features

  • Flow rate up to 160 l/min (9,6 m³/h)

  • Head up to 56 m

  • Continuous service

  • Temperature of the liquid from -10 °C to +90 °C

  • Ambient Temperature to +40 °C

  • Manometric suction lift up to 7 m

  • Max. working pressure:

  •    – 6 bar for CP 100-130-132-150-158
       – 10 bar for CP 170-190-200

CP 0.25-2.2 kW.jpg

CP 2.2 KW
Centrifugal pumps

CP 0.25-2.2 kW_EN_50Hz.png

Suitable for use with clean water and liquids. These pumps are easy to use, and widely used in civil, agricultural and industrial applications such as for supplying water, in conditioning and cooling systems, for irrigation, etc. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.​

​

​

 

 

Models and performance guide​:

Features

  • Flow rate up to 900 l/min (54,0 m³/h)

  • Head up to 76 m

  • Continuous service

  • Temperature of the liquid from -10 °C to +90 °C

  • Ambient Temperature da -10 °C to +40 °C

  • Manometric suction lift up to 7 m

  • Max. working pressure 10 bar

  • Pump Body is cast iron.

  • Brass impeller

CP fino a 11 kW.jpeg

CP 11 KW
Centrifugal pumps

CP fino a 11 kW_Performance.png

The open impeller design allows liquids containing relatively high levels of impurities to be pumped without the risk of the impeller clogging.


NGA pumps are particularly suitable for pumping liquids that are not completely clean, guaranteeing the passage of solids up to 20 mm and therefore applications such as: transfers from canals, rivers, reservoirs, tanks, etc.


Installation needs to be undertaken in well ventilated closed areas or anyway protected from bad weather.

​

Models and performance guide​:​

Features

  • Flow rate up to 900 l/min (54,0 m³/h)

  • Head up to 20,50 m

  • Temperature of the liquid from -10 °C to +90 °C

  • Ambient Temperature da -10 °C to +40 °C

  • Manometric suction lift up to 7 m

  • Max. working pressure:

  •    – 6 bar for NGA1 and NGA2
       – 10 bar for NGA3

  • Passage of suspended solids up to:

  •    – Ø 12 mm for NGA1 and NGA2
       – Ø 20 mm for NGA3

  • Continuous service

NGA.jpeg

NGA
Centrifugal pumps with open impeller

NGA_EN_50Hz.png

NGA-PRO
Stainless steel with open impeller

Suitable for use with liquids that are not chemically aggressive towards the materials from which the pump is made.

All of the components in contact with the pumped liquid are constructed in stainless steel AISI 316.


NGA-PRO pumps are particularly suitable for pumping liquids that are not completely clean, guaranteeing the passage of solids up to 20 mm and therefore applications such as: washing, circulation of cooling liquids, tanks etc.

​

Models and performance guide​:

Features

NGA-PRO.jpeg

  • Flow rates up to 70m3/h

  • Heads up to 300m

  • Abrasion-resistant

  • Constant, non-pulsating flow

  • Pressure head developed is independent of pump speed

  • Flow is proportional to speed

  • High developed head for irrigation

  • Suitable for drive by electric motor (AC/DC/solar), petrol engine, diesel engine or tractor PTO

  • Serviceable on site by unskilled labour

  • Stainless steel flexible shaft

NGA-PRO_EN_50Hz_Performance.png

These pumps are primarily used for water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in agricultural applications.


The pumps must be installed in enclosed places, or at least protected against inclement weather.​

​

​

​

​

Models and performance guide​:

Features

  • Performance Range:

  • Flow rate up to 6000 l/min (360,0 m³/h)

  • Head up to 98 m

  • Application Limit:

  • Temperature of the liquid from -10 °C to +90 °C

  • Ambient Temperature da -10 °C to +40 °C

  • • Manometric suction lift up to 7 m
    • Max. pressure in pump body 10 bar (PN10)
    • Continuous service S1

F.jpeg

F - Centrifugal
Standardised EN 733

F_Performance.png

Application

  • Industrial and Civil.

  • Agriculture for irrigation.

  • Cooling systems.

  • Washing systems.

  • Water supply systems and pressure systems.

Need more information?

Let our sales technician contact you.

Thanks for submitting!

bottom of page